PLA-SET

Radio Frequency Engineering

PLA-SET for Site Validation

Precision Loop Antenna

The PLA set consists of two active, battery powered loop antennas intended for site validation. With the broad frequency range from 9 kHz to 30 MHz it is suitable for Normalized Site Attenuation (NSA) measurements and Shielding Effectiveness (SE) measurements.

Normalized Site Attenuation (NSA) measurement at 3 m, 5 m and 10 m distance is convenient due to sufficient dynamic range, all required documentation and calibration. Setup and alignment is easy with the integrated tripod and laser system. A decoupling unit to avoid ground loops is included.

Shielding Effectiveness (SE) can be measured with a high dynamic. No external power amplifier or low noise preamplifier is required.

 

Product Highlights

  • Active transmit and receive antenna
  • Integrated tripod with laser alignment
  • Plenty of transmit power
  • Very low noise floor
  • Battery powered
  • Individually calibrated
     

Applicable Standards

  • CISPR 16-1-4
  • EN 50147-1
  • IEEE 299
     

Download

Please find the Technical Data in our

>> PLA-SET leaflet

>> Manual PLA

>> NSIL - rectangular loop - 60 cm.xlsx​​​​​​​