Publications Miscellaneous

Radio Frequency Engineering

Characterization and Correction of Calibration Jigs for LISN Impedance Measurements

Alexander Kriz

2015 IEEE International Symposium on Electromagnetic Compatibility, Santa Clara, USA

Abstract:
The papers deals with the influence of the calibration jig to the impedance measurement result. The goal is to characterize two different designs of calibration jigs and to correct the LISN impedance accordingly. Without proper correction there is a large difference of the phase angle. It is found that the correction works properly. However the results are not without ambiguity, due to the lack of the definition of a measurand. Assumptions regarding a suitable calibration plane must be made for proper phase angle measurements.

 

>> Download Paper in Adobe Acrobat Format

<< back to Publications

 


Download the Free Acrobat Reader